Our extensive wood chipper range includes models that meet the demands for both bioenergy and landscaping applications. Farmi chippers have been designed with ease of use, productivity and, of course, safety in mind. The chippers are available as manual feeders and crane feeders. The smallest manual feed models are designed for producing landscaping chips and the crane-fed models for energy chips. The chippers will consume anything that you feed into the infeed chute. The CH10 and CH18 chippers are suitable for trimming branches, twigs and tree tops. With enough rounds in the CH18 chipper, you can produce good quality fuel chips from trimmed tree limbs. The CH27 and CH38 size class of chippers are manufactured with 2-blade rotors. Thanks to the rotor structure and the additional blades in the chipper casing and at the mouth of the exhaust chute, the chips produced with the chippers are clean and of high quality.
OUR THREE-STEP WOOD CHIPPING PROCESS PRODUCES CLEAN CHIPS WITH CONSISTENT QUALITY
The cutting process consists of the following three steps:
1. The cutting blades remove the chip from the wood.
2.The additional blades / counter blades ensure that the chips are crushed properly
3. A stick crusher / power crusher prevents long wood pieces from entering the exhaust chute.
Indeed, the Farmi chippers are known in the market as among the best and most productive wood chipper units in their size category.All of our chippers, except for the manual feed CH27 model, have a wide feeding angle, which reduces the need for energy. As wood is fed at an angle to the blade disc, cutting requires less power than a more direct feed.With the exception of the CH10 chipper, the other models have an adjustable chip size. In the CH27 and CH38 chipper, the adjustment is made by moving the blade holders. By purchasing your own wood chipper, you can make your chips whenever it best suits you. You get to avoid having to depend on others’ schedules or on rental machines.
Crane feed, chain conveyor L = 1,400 mm, angled feed 2-roll feed at a 55-degree feeding angle Smart Feed control system Automatic pressure reversal mechanism
Crane feed, extension to feeding desk, wide angle feed 2-roll feed, at a 55-degree angle on a longer feeding desk Smart Feed control system Automatic pressure reversal mechanism
The CH38 wood chipper has been designed for contracting and professional use. The chipper has a steel feed conveyor for crane feed. A roll feeder machine is also available for chipping solid wood and trimmed trunks. The chip is suitable for small stokers and large heating plants.
Manual feeding Hydraulic direct feeding 90-degree direct feeding with two rolls High-quality chip for landscaping or fuel chips Smart Feed control system Automatic pressure reversal mechanism
The CH18 disc model is a small and efficient machine for landscaping involving wicker, branches and tree crowns. You can also get a version of this wood chipper meeting the latest standard for wood chippers.